Micron XTR NVMe SSD Firmware Update Instructions (E2XT001)
This document describes how to upgrade the firmware on a Micron XTR NVMe SSD to E2XT001 using either nvme-cli or msecli. For further assistance with this process please contact your local Micron representative.
Upgrade using nvme-cli
1. Download and install latest version of nvme-cli from github.com:
a. https://github.com/linux-nvme/nvme-cli/releases
2. Obtain the required XTR Firmware from your Micron contact or from www.micron.com:
a. Firmware name: Micron_XTR_E2XT001_release.ubi
3. List the SSDs in the system:
a. nvme list
i. Note: The target name (nvmeX) for the SSD
4. To download the firmware, use the following nvme-cli commands:
a. nvme fw-download /dev/nvmeX -f Micron_XTR_E2XT001_release.ubi
i. Note: The same firmware .ubi file is used for all form factors and densities
5. To commit and activate the firmware, use the following nvme-cli command:
a. nvme fw-commit /dev/nvmeX -s 2 -a 3
6. Confirm the firmware has been successfully updated to version E2XT001
a. nvme list
Upgrade using msecli
1. Download and install latest version of msecli from micron.com:
a. https://www.micron.com/products/solid-state-storage/storage-executive-software
2. Obtain the required XTR Firmware from your Micron contact or from www.micron.com:
a. Firmware name: Micron_XTR_E2XT001_release.ubi
3. List the SSDs in the system:
a. msecli -L
i. Note: The target name (nvmeX) for the SSD
4. To download, commit and activate the firmware, use the following msecli command:
a. msecli -F -U Micron_XTR_E2XT001_release.ubi -n -S 2
i. Note: The same firmware .ubi file is used for all form factors and densities
5. Confirm the firmware has been successfully updated to version E2XT001
a. msecli -L
平阴在线
彩票平台
彩票平台
赌博平台
博彩导航
银河娱乐博彩
Football-betting-platform-admin@3rdwardbrooklyn.org
火博体育
Asian-gaming-platform-rankings-support@dersport.net
美高梅博彩
芙丽芳丝
武侠小说网
365编辑器
青蒿药业
中江种业
7M体育网
国家电力投资集团公司
中国曹妃甸
中工网工会频道
郑州大学附属肿瘤医院
天一生物